Our Products
About Flameproof Equipments Division
VMCL has always poised for relentless dedication towards New Product Development. As a part of the continual development, Flame Proof Equipment Division had Designed & Developed Flame Proof/Weather Proof protected Electrical Equipment applicable for Hazardous Area zone 1 & 2 and Explosive Gas Group IIB & IIC with Degree of Protection IP65/IP66 for use in hazardous areas such as Petrochemical, Bulk Drug, Fertilizer, Refinery units etc.
Major Orders
- Tekvihaan Engineering Solutions.
- Voltech Engineers Private Limited – Basco Products (Kenya).
- PRECIA MOLEN INDIA PRIVATE LIMITED.
- Fujita Engineering India Private Limited.
- Umesh Electricals – Value.
- Precia Molen India Private Limited.
Our Certifications
ISO Certification
Services Offered
Cat. No : VMC/1233 & VMC/1233C
- Material: Cast Aluminium Alloy (LM6)
- Flameproof: Zone 1 & 2, GR IIB & IIC as per IS/IEC 60079 - 1:2007
- Weatherproof: IP 65/66 as per IS/IEC 60529:2001, IS/IEC 60079-0/2011
- Finish: Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket: Neoprene
- Glass: Flat Heat Resistant Toughened Type-A
- Lamp Holder: ES Holder.
- Cable Entry: 2 Nos. 3/4” ET Entry.
- Lamp Rating (Integral type): Upto 75W LED/COB & Upto 160W MLL
- Lamp Rating (Non-Integral type): 80W HPMV,125W HPMV,70W MH
- Approval : CIMFR, PESO & BIS
Cat. No : VMC/1234
- Material:Cast Aluminium Alloy (LM6)
- Flameproof:Zone 1 & 2, GR IIB as per IS/IEC 60079-1:2007
- Weatherproof:IP 65 as per IS/IEC 60529:2001
- Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket:Neoprene
- Glass: Well glass Heat Resistant Toughened Type-A
- Lamp Holder:ES Holder.
- Cable Entry: 2 Nos. 3/4” ET Entry.
- Lamp Rating (Integral type):80W HPMV,125W HPMV,70W HPSV, 70W MH 3x26W CFL,75W LED
- Lamp Rating (Non-Integral type) :250W HPMV,250W HPSV, 250W MH
- Approval :CIMFR, PESO & BIS
Cat. No : VMC/1271
- Material: Cast Aluminium Alloy (LM6)
- Flameproof: Zone 1 & 2, GR IIB as per IS/IEC 60079-1:2007
- Weatherproof: IP 65 as per IS/IEC 60529:2001
- Finish: Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Approval : CIMFR, PESO & BIS
- Gasket: Neoprene
- Glass: Heat Resistant Toughened Type-A
- Lamp Holder: Pin type Holder.
- Cable Entry: 2 Nos. 3/4” ET Entry.
- Lamp Rating: 1x40W,1x36W CFL,1x28W T5,1x22W LED 2x40W,2x36W CFL,2x28W T5,2x22W LED
Cat. No : VMC/127
- Material: Cast Aluminium Alloy (LM6)
- Flameproof: Zone 1 & 2, GR IIC as per IS/IEC 60079-1:2007
- Weatherproof: IP 66 as per IS/IEC 60529:2001
- Finish: Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket: Neoprene
- Glass: Heat Resistant Toughened Type-A
- Lamp Holder: ES Holder.
- Cable Entry: 2 Nos. 3/4” ET Entry
- Lamp Rating: 60W GLS, 18W CFL,50W HALOGEN, upto 12W LED
- Approval: CIMFR, PESO & BIS
Cat. No : VMC/128S
- Material:Cast Aluminium Alloy (LM6)
- Flameproof: Zone 1&2, GR IIC as per IS/IEC 60079-1:2007
- Weatherproof: IP 66 as per IS/IEC 60529:2001
- Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket:Neoprene
- Glass: Flat GlassHeat Resistant Toughened Type -A
- Cable Entry:2 Nos. 3/4” ET Entry.
- LED Rating:Upto 20W
- Approval : CIMFR, PESO & BIS
Cat. No : VMC/151
- Material: Cast Aluminium Alloy (LM6)
- Flameproof: Zone 1 & 2, GR IIC as per IS/IEC 60079 -1:2007
- Weatherproof: IP 66 as per IS/IEC 60529:2001
- Finish: Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket: Neoprene
- Glass: Heat Resistant Toughened Type-A
- Lamp Holder: ES Holder.
- Cable Entry: 2 Nos. 3/4” ET Entry.
- Lamp Rating (Non-Integral type)): 150W MH,250W HPMV, 250W HPSV, 250W MH, 150W LED
- LED Lamp Rating: Upto 150W LED / COB
- Approval: CIMFR, PESO & BIS
Cat. No : VMC/184 CRF
- Material:Cast Aluminium Alloy (LM6)
- Flameproof: Zone 1&2, GR IIB as per IS/IEC 60079-1:2007
- Weatherproof: IP 65 as per IS/IEC 60529:2001, IS/IEC 60079-0/2011
- Finish: Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket:Neoprene
- Glass:Heat Resistant Toughened Type-A
- Cable Entry: 2 Nos. 3/4” ET Entry.
- LED / Lamp Rating:Upto 100W LED / 2X36W CFL
- Approval :CIMFR, PESO & BIS
Cat. No: VMC/1010 & VMC/175
- Description: FLP/WP Push Button Station
- Material:Cast Aluminium Alloy (LM6)
- Flameproof: Zone 1 & 2, GR IIB & IIC as per IS/IEC 60079 -1:2007
- Weatherproof:IP 65 as per IS/IEC 60529:2001
- Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket:Neoprene
- Cable Entry: 2 Nos. 3/4” ET Entry.
- Approval : CIMFR, PESO & BIS
Cat. No: VMC/105
- Description: FLP/WP Limit Switch (Roller/Lever type)
- Material: Cast Aluminium Alloy (LM6)
- Flameproof: Zone 1 & 2, GR IIB & IIC as per IS/IEC 60079 -1:2007
- Weatherproof:IP 65 as per IS/IEC 60529:2001
- Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket:Neoprene
- Cable Entry: 1 No. 3/4” ET Entry.
- Limit Switch : 1NO+1NC, Upto 10A 500V
- Type : Roller / Lever
- Approval : CIMFR, PESO & BIS
Cat.No: VMC/105 & VMC/1010
- Description: FLP/WP 16A DP ON/OFF Rotary Switch
- Material:Cast Aluminium Alloy (LM6)
- Flameproof:Zone 1 & 2, GR IIC as per IS/IEC 60079 -1:2007
- Weatherproof:IP 65 as per IS/IEC 60529:2001
- Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket:Neoprene
- Cable Entry:2 Nos. 3/4” ET Entry.
- Switch : Upto 16A DP ON/OFF Rotary Switch
- Approval :CIMFR, PESO & BIS
Cat. No: VMC/175
- Description: FLP/WP 40A TPN ON/OFF Rotary Switch
- Material:Cast Aluminium Alloy (LM6)
- Flameproof:Zone 1 & 2, GR IIC as per IS/IEC 60079 -1:2007
- Weatherproof:IP 65 as per IS/IEC 60529:2001
- Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket:Neoprene
- Cable Entry:2 Nos. 1” ET Entry.
- Switch : Upto 40A TPN ON/OFF Rotary Switch
- Approval :CIMFR, PESO & BIS
Cat. No: VMC/187
- Description : FLP/WP 63A TPN ON/OFF Rotary Switch
- Material:Cast Aluminium Alloy (LM6)
- Flameproof:Zone 1 & 2, GR IIC as per IS/IEC 60079-1:2007
- Weatherproof:IP 65 as per IS/IEC 60529:2001
- Finish: Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket:Neoprene
- Cable Entry: 2 Nos. 1.0” ET Entry (Max)
- Switch : Upto 63A TPN ON/OFF Rotary Switch
- Approval: CIMFR, PESO & BIS
Cat. No: VMC/186
- Description: FLP/WP Control Gear Box
- Material: Cast Aluminium Alloy (LM6)
- Flameproof:Zone 1 & 2, GR IIB as per IS/IEC 60079-1:2007
- Weatherproof: IP 65 as per IS/IEC 60529:2001
- Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket:Neoprene
- Cable Entry:As per Customer Request
- Rating:Upto 400W HPMV/HPSV/MH
- Approval :CIMFR, PESO & BIS
Cat. No: VMC/1010
- Material:Cast Aluminium Alloy (LM6)
- Flameproof:Zone 1 & 2, GR IIC as per IS/IEC 60079-1:2007
- Weatherproof:IP 65 as per IS/IEC 60529:2001
- Finish: Post Box Red to shade 538 of IS:5 (Epoxy Powder Coated)
- Gasket:Neoprene
- Cable Entry: 2 Nos. 3/4” ET Entry.
- Push Button:1 No. Mushroom Head Push Button Red Colour With Glass & hammer with chain
- Approval :CIMFR, PESO & BIS
Cat. No: VMC/187 & VMC/187HR
- Description : FLP/WP Hooter
- Material:Cast Aluminium Alloy (LM6)
- Flameproof:Zone 1 & 2, GR IIC as per IS/IEC 60079 -1:2007
- Weatherproof:IP 65 as per IS/IEC 60529:2001
- Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket:Neoprene
- Electrical Rating : 230V AC & 24.V AC/DC
- Cable Entry:2 Nos. 3/4” ET Entry.
- Noise Level: 120db.
- Approval : CIMFR, PESO & BIS
Cat. No: VMC/1010
- Description : FLP/WP 25A (2P+E) Interlocked Plug & Socket
- Material: Cast Aluminium Alloy (LM6)
- Flameproof:Zone 1 & 2, GR IIC as per IS/IEC 60079-1:2007
- Weatherproof:IP 65 as per IS/IEC 60529:2001
- Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket:Neoprene
- Cable Entry:2Nos. 3/4” ET Entry
- Switch :Upto 25A DP ON/OFF Switch
- Note:The plug cannot be removed when the switch is in ‘ON' position and can be withdrawn, only when the switch is in ‘OFF' position
- Approval :CIMFR, PESO & BIS
Cat. No: VMC/187
- Description: FLP/WP 32A (4P+E) Interlocked Plug & Socket
- Material: Cast Aluminium Alloy (LM6)
- Flameproof: Zone 1 & 2, GR IIC as per IS/IEC 60079-1:2007
- Weatherproof: IP 65 as per IS/IEC 60529:2001
- Finish: Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket: Neoprene
- Cable Entry: 2Nos. 1” ET Entry.
- Switch : 32A TPN ON/OFF Switch
- Note : The plug cannot be removed when the switch is in ‘ON' position and can be withdrawn, only when the switch is in ‘OFF' position
- Approval : CIMFR, PESO & BIS
Cat. No: VMC/186
- Description: FLP/WP 63A/100A (4P+E) Interlocked Plug & Socket
- Material: Cast Aluminium Alloy (LM6)
- Flameproof:Zone 1 & 2, GR IIC as per IS/IEC 60079-1:2007
- Weatherproof:IP 65 as per IS/IEC 60529:2001
- Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket:Neoprene
- Cable Entry:2Nos. 1 1/2” ET Entry.
- Switch :63A/100A TPN ON/OFF Switch/MCB/ELCB
- Note :The plug cannot be removed when the switch is in O` N' position and can be withdrawn, only when the switch is in O` FF' position
- Approval : CIMFR, PESO & BIS
Cat. No: VMC/175
- Description : FLP/WP DOL Starter from 0.5HP to 15HP (Without Isolator)
- Material:Cast Aluminium Alloy (LM6)
- Flameproof:Zone 1 & 2, GR IIB as per IS/IEC 60079-1:2007
- Weatherproof:IP 65 as per IS/IEC 60529:2001
- Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket:Neoprene
- Cable Entry:2Nos. 1” ET Entry & 1No.3/4” ET Entry.
- Start PB:Green Colour, Momentry Type
- Stop PB : Red Colour, Padlockable Type
- Approval:CIMFR, PESO & BIS
Cat. No: VMC/187
- Description: FLP/WP DOL Starter from 0.5HP to 15HP ( With Isolator)
- Material: Cast Aluminium Alloy (LM6)
- Flameproof:Zone 1 & 2, GR IIC as per IS/IEC 60079-1:2007
- Weatherproof: IP 65 as per IS/IEC 60529:2001
- Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket:Neoprene
- Cable Entry: 2Nos. 1” ET Entry & 1No.3/4” ET Entry.
- Start PB : Green Colour, Momentry Type
- Stop PB : Red Colour, Padlockable Type
- Switch : 16A / 32A (Max) DP ON/OFF Rotary Switch
- Approval : CIMFR, PESO & BIS
Cat. No: VMC/1001 & VMC/186
- Description: FLP/WP Star/Delta Starter upto 150HP
- Material: Cast Aluminium Alloy (LM6)
- Flameproof:Zone 1 & 2, GR IIB as per IS/IEC 60079-1:2007
- Weatherproof:IP 65 as per IS/IEC 60529:2001
- Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket:Neoprene
- Terminal Block:As per Customer Request
- Cable Entry:As per Customer Request
- Approval :CIMFR, PESO & BIS
Cat. No: VMC/105
- Description : FLP/WP 4 Way Junction Box
- Material:Cast Aluminium Alloy (LM6)
- Flameproof:Zone 1 & 2, GR IIC as per IS/IEC 60079-1:2007
- Weatherproof:IP 65 as per IS/IEC 60529:2001
- Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket:Neoprene
- Terminal Block :4Nos. 2.5sqmm terminal
- Cable Entry: As per Customer Request
- Approval :CIMFR, PESO & BIS
Cat. No: VMC/186
- Description: FLP/WP Multiway Junction Box
- Material:Cast Aluminium Alloy (LM6)
- Flameproof:Zone 1 & 2, GR IIB as per IS/IEC 60079-1:2007
- Weatherproof:IP 65 as per IS/IEC 60529:2001
- Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket:Neoprene
- Terminal Block:As per Customer Request
- Cable Entry:As per Customer Request
- Dimension :Refer Table 1
- Approval :CIMFR, PESO & BIS
Cat . No: VMC/1001 & VMC/186
- Description: FLP/WP 12/18/24/36 Way Lighting / Power Distribution Board
- Material:Cast Aluminium Alloy (LM6)
- Flameproof:Zone 1 & 2, GR IIB as per IS/IEC 60079-1:2007
- Weatherproof:IP 65 as per IS/IEC 60529:2001
- Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket:Neoprene
- Terminal Block & Cable Entry :As per Customer Request
- Dimensions :Refer Table 1
- Approval :CIMFR, PESO & BIS
Cat. No : VMC/186
- Description: FLP/WP 12/18/24/36 Way Lighting / Power Distribution Board
- Material:Cast Aluminium Alloy (LM6)
- Flameproof:Zone 1 & 2, GR IIB as per IS/IEC 60079-1:2007
- Weatherproof:IP 65 as per IS/IEC 60529:2001
- Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket:Neoprene
- Terminal Block & Cable Entry: As per Customer Request
- Dimensions : Refer Table 1
- Approval :CIMFR, PESO & BIS
Cat. No: VMC/186
- Description: FLP/WP Instrument Enclosure
- Material:Cast Aluminium Alloy (LM6)
- Flameproof: Zone 1&2, GR IIB as per IS/IEC 60079-1:2007
- Weatherproof:IP 65 as per IS/IEC 60529:2001, IS/IEC 60079-0/2011
- Type :4 & 6 Push Button Enclosure
- Approval:CIMFR, PESO & BIS
- Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket:Neoprene
- Terminal Blocks & Cable Entry :As per Request
Cat. No : VMC/1001
- Material: Cast Aluminium Alloy (LM6)
- Flameproof : Zone 1&2, GR IIB as per IS/IEC 60079-1:2007
- Weatherproof : IP 65 as per IS/IEC 60529:2001, IS/IEC 60079-0/2011
- Type : 24 Push Button with 5 Switch Enclosure
- Finish: Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket: Neoprene
- Terminal Blocks & Cable Entry : As per Request
- Approval : CIMFR, PESO & BIS
Cat. No: VMC/1001 & VMC/186
- Description : FLP/WP PLC Panel / MCC Panel
- Material: Cast Aluminium Alloy (LM6)
- Flameproof:Zone 1 & 2, GR IIB as per IS/IEC 60079-1:2007
- Weatherproof:IP 65 as per IS/IEC 60529:2001
- Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket:Neoprene
- No. of Feeders :As per Customer Request
- Cable Entry :As per Customer Request
- Approval:CIMFR, PESO & BIS
Cat. No : VMC/1271 CA
- Description : FLP/WP Camera Housing Enclosure
- Material: Cast Aluminium Alloy (LM6)
- Flameproof: Zone 1&2, GR IIC as per IS/IEC 60079-1:2007
- Weatherproof:IP 65 as per IS/IEC 60529:2001, IS/IEC 60079-0/2011
- Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
- Gasket:Neoprene
- Terminal Blocks & Cable Entry : As per Request
- Approval:CIMFR, PESO & BIS
Cat. No : VMC/209G & VMC/209P
- Description: FLP/WP Double compression cable Gland FLP/WP Dummy Plug
- Material:Brass, Stainless Steel, Aluminium & MS
- Flameproof: Zone 1 & 2, GR IIB as per IS/IEC 60079-1:2007
- Weatherproof: IP 66 as per IS/IEC 60529:2001
- Size: 3/4" to 3” BSC Thread 1/2" to 2 1/2 “ NPT
- Approval :CIMFR, PESO & BIS
Cat. No: VMC/WP17
- Description : Weatherproof 4 Way Junction Box
- Material:Cast Aluminium Alloy
- IP Protection:IP 65 as per IS/IEC 60529:2001
- Finish:Light Grey to Shade 631 of IS:5 or RAL 7032 (Epoxy Powder Coated)
- Gasket:Neoprene
- Terminal Block:Upto 6 Nos.2.5 Sqmm Terminal
- Cable Entry:4 Nos 3/4” ET Entry.
Cat. No: VMC/WP04
- Description : Weatherproof Street Light Junction Box
- Material:Cast Aluminium Alloy.
- IP Protection:IP 65 as per IS/IEC 60529:2001
- Finish:Light Grey to Shade 631 of IS:5 or RAL. 7032 (Epoxy Powder Coated)
- Gasket:Neoprene
- Electrical Accessories:1 Set of SP MCB & Neutral Link
- Terminal Block:6 Nos. 2.5 Sq.mm Terminal
- Cable Entry: 3 Nos. 3/4“ ET Entry.
- Material:Cast Aluminium Alloy
- IP Protection:IP 65 as per IS/IEC 60529:2001
- Finish:Light Grey to Shade 631 of IS:5 or RAL 7032 (Epoxy Powder Coated)
- Gasket:Neoprene
- Terminal Block: As Per Customer Request
- Cable Entry:As Per Customer Request
- Dimension : As Per below Chart
Cat. No: VMC/WP14
- Description : Weatherproof Start/Stop Push Button Station
- Material: Cast Aluminium Alloy
- IP Protection:IP 65 as per IS/IEC 60529:2001
- Finish:Light Grey to Shade 631 of IS:5 or RAL 7032 (Epoxy Powder Coated)
- Gasket:Neoprene
- Cable Entry:2 Nos. 3/4” ET Entry.
- Start PB: Green Colour, Momentary Type
- Stop PB: Red Colour, Mushroom Head, Pad Lockable or Key Lockable type
Cat. No: VMC/WP02
- Description : Weatherproof Forward/Reverse/Stop Push Button Station
- Material:Cast Aluminium Alloy.
- IP Protection:IP 65 as per IS/IEC 60529:2001
- Finish: Light Grey to Shade 631 of IS:5 or RAL 7032 (Epoxy Powder Coated)
- Gasket: Neoprene
- Cable Entry: 2 Nos. 3/4” ET Entry.
- Forward PB:Green Colour, Momentary Type
- Reverse PB:Yellow Colour, Momentary Type
- Stop PB: Red Colour, Mushroom Head, Pad Lockable or Key Lockable type
Cat. No: VMC/WP03
- Description : Weatherproof Start/Stoppush Button Station With Ammeter
- Material: Cast Aluminium Alloy
- IP Protection: IP 65 as per IS/IEC 60529:2001
- Finish: Light Grey to Shade 631 of IS:5 or RAL 7032 (Epoxy Powder Coated)
- Gasket:Neoprene
- Cable Entry: 3 Nos. 3/4” ET Entry
- Start PB: Green Colour, Momentary Type
- Stop PB: Red Colour, Mushroom Head, Pad Lockable or Key Lockable type
- Ammeter: 1No.72sqmm Analog Ammeter
| Sl.No. | Organization Name | Description | Validity |
|---|---|---|---|
| 1 | TANTRANSCO | Flameproof Equipments | 19.08.2024 |
| 2 | Bharat Petroleum Corporation Limited | Flameproof Equipments | Permanent |
| 3 | Bharat Heavy Electricals Ltd, Trichy | Flameproof Junction Box & Cable Glands | Permanent |
| 4 | Indian Oil Corporation Limited | Flameproof Products | Permanent |
| Sl.No. | Organization Name | Description |
|---|---|---|
| 1 | Precia Molen India Pvt Ltd, Thirumazhisai | Flameproof Junction Box, I400 Indicator, I40 Indicator, Enclosure with Push Buttons, Cable Glands & Blanking Plugs |
| 2 | V.S.Pressure Vessels & Gas Projects Pvt Ltd | Flameproof LED Well Glass Fitting, Local Control Station, Cable Glands, Plug & Sockets, Junction Box |
| 3 | Thirumani Industry | Flameproof Junction Box |
Our Team
Mr. M. K. Thiyagarajan
Marketing Head
Mr.G. P. Haribabu
Unit Head
Mr. M. Maharajan
Factory Head
Mr. S. Jeevanandham
Design & Quality Head
Mrs. R. Anita
Planning Head
Mr. R. Elavarasu
Procurement Dept
Connect With Us
Connect with us for reliable, high-performance switchgear manufacturing solutions designed to meet your industrial power and safety requirements.