About Us
Condition Assessment
We provide Testing & Commissioning Services as per IEC/IEEE standards
- Residual Life Assessment of Transformers up to 765KV Class 500MVA
- Dielectric Frequency Response Analyser
- Residual Life Assessment of Transformers up to 765KV Class 500MVA
- On-line (AE Technique) for power transformer & Off-line Partial Discharge Identifications by abiding the IEC 62478 and IEC 60270.
- On-line PD (AE Technique) & High frequency PD testing for GIS.
- Sweep Frequency response Analyser
- Capacitance and Tan Delta Dissipation factor /Power factor measurement by abiding IEEE C57.
- RSO (Recurrent surge oscillogram) for generators.
- Assessing the internal characteristics of circuit breaker (MV, HV and EHV)
- Diagnostics studies of generator.
Turnaround Services
- Executing the ELECTRICAL TA - Turnaround Business (Oil & Gas, Power Plants and Process Plants).
- Executing the refurbishment/retrofitting activities of various range of power plants from 6 MW to 600 MW with the various voltage levels of 415 V to 400 KV.
- Refurbishment & Overhauling Transformers Ranging from 1000 KVA to 250 MVA (400/220KV Class) & Line Reactors Up to 50 MVAr.
- LT & MV Switchgear refurbishment
- Overhauling of Power Generators up to 33 MW
- MCC & PCC, HT & LT Panels refurbishment
- Overhauling/refurbishment activities of various ranges of HT motors upto 10 MW motors and all type of LT motors
- Control & Instrumentation Services.
Diagnostics
- Partial Discharge Measurement by abiding the IEC 60270
- Recurrent Surge Oscilloscope
- Capacitance and Dissipation factor/power factor Measurement by abiding the IEEE C57
- DC High Voltage Test for Stator Windings
- Wedge Tightness Identification using soft Hammer
- Pole drop Test
- Electro Magnetic Core Imperfection Detection
- On-line (AE Technique) for power transformers and Off-line Partial Discharge Measurement of Cables, GIS, CT's and Bus bar supporting Insulators by abiding the IEC 62478 and IEC 60270.
- Dynamic Contact Resistance Measurement
- Arcing/Wiping Contact Resistance Measurement
- Over travel measurement
- Moving Contact Travel Measurement
- Dew Point Measurement
- Bounce Measurements between the main contacts
- Bounce Measurements between the Auxiliary Contacts
- Timing Measurement
- Electrical Signature Analysis
- Surge comparison tester
- Partial discharge analysis
- Capacitance measurement
- Winding resistance measurement
- Power factor/dissipation factor measurement
- Harmonics analysis
- Vibration analysis
- Noise measurement
Control & Instrumentation
Installation
Installation of all type of field & analytical Instruments. Impulse tubing for instruments as per hook-up drawings. Supervisory technical manpower support.
Control Value Activities
Commissioning & Calibration of various control values. Installation & calibration of motorized valves, electro-pneumatic and smart positioners. Service & overhauling all type of control valves & turn around management.
PLC/DCS SYSTEM
Process loop checking(Hot & Cold) of field instruments. Powering up the sensors & field instruments. Uploading & downloading program, logic design & I/O assignment as per standard. Installation, Inspection, Calibration, loop Checking and site acceptance test for Control Valves & On/Off Valves. DCS, PLC& SCADA System Commissioning Activities
Calibration & Commissioning
Supervision of erection activities. Calibration & Commissioning of Instruments by skilled Technician. Cable Termination, loop checking by skilled Electricians. DCS Operators and Field Operators for Power plants
Areas Covered
Power Transmission & Distribution
Power Plants
Renewables
Railways / Airport / Seaport
Oil & Gas and Process Industries
Metals & Minerals
Smart Cities & Data Centers
Project List
- Work order received for Electrical works (132KV Switchyard dismantling and new erection, EBOP refurbishment and new erection, dismantling of unutilized electrical Equipment’s, cable laying and cable tray erection, Earthing and Lighting system etc..) and Instrumentation work (dismantling of existing unutilized instrumentation Equipment’s, Instrumentation cable laying, fabrication and erection etc..) for completion of 130 MW Co-generation power plant, for VEDANTA LIMITED - ALUMINIUM & POWER PLANT- 130MW alumina refinery expansion work at Lanjigarh, Odisha.
- Work order received for the E&I package at 2 X 600 MW (Athena Chhattisgarh Power Limited) Super Thermal Power Plant at Singhitarai - Chhattisgarh, from M/s VEDANTA LIMITED through M/s. POWER MECH PROJECTS LIMITED. This order involves conducting the ‘Condition Assessment, Retrofitting, Balance Equipment Installation Testing & Commissioning’.
- Work order received for the overhauling of Transformer and various electrical equipment for power plants at HPL Premises, Haldia and successfully completed the Turnaround Job within a time span of 25 days.
- Work order received for the testing & commissioning activities at from M/s. Tata Steel, Angul, Odisha.
- Work order received for the testing & maintenance of air circuit breaker at from M/s. Neelachal Ispat Nigam Limited, Jajpur, Odisha.
- Work order received from M/s. Techno Electric Engineering Ltd. for conducting the Testing & Commissioning at their various project sites in the duration of 6 months.
- Work order received from M/s. ITC Ltd., for conducting the Health assessment, retrofitting and pre-commissioning Test of Electrical Distribution Activities at their Rajarhat premises.
- Work order received from M/s. MCPI Private Limited for conducting Testing & Commissioning at Haldia Site.
- Work order received from M/s. Somvanshi Solar and Power Consultancy Pvt. Ltd. for conducting the Testing & Commissioning at their various project sites in the duration of six months.
- Work order received from M/s. India Power Corporation Limited - Testing & Commissioning.
- Work order received from M/s. Shyam Metalics - Testing & Commissioning order value.
- Work order received from M/s. Ind-Barath Energy (Utkal) Limited (JSW) - Testing & Commissioning.
- successfully received workorder for Electrical works (132KV Switchyard dismantling and new erection, EBOP refurbishment and new erection, dismantling of unutilized electrical Equipment’s, cable laying and cable tray erection, Earthing and Lighting system etc..) and Instrumentation work (dismantling of existing unutilized instrumentation Equipment’s, Instrumentation cable laying, fabrication and erection etc..) for completion of 130 MW Co-generation power plant, for VEDANTA LIMITED - ALUMINIUM & POWER PLANT- 130MW alumina refinery expansion work at Lanjigarh, Odisha.
- successfully received workorder for the E&I package at 2 X 600 MW (Athena Chhattisgarh Power Limited) Super Thermal Power Plant at Singhitarai - Chhattisgarh, from M/s VEDANTA LIMITED through M/s. POWER MECH PROJECTS LIMITED. This order involves conducting the ‘Condition Assessment, Retrofitting, Balance Equipment Installation Testing & Commissioning’.
- Successfully received order 2 x 3 MW from M/s. Meenakshi Energy Ltd., Nellore, Andhra Pradesh site for various electrical activities in plant premises.
- Successfully received order for Electrical Testing, Calibration & commissioning activities from M/s Rashmi Group, Tuticorin.
- We successfully completed Retrofitting, Electrical, Testing & Commissioning of electrical network from 400 KV transmission line, 400 KV switchyard, 240 MVA x 3 generator transformers and its station & auxiliary’s boards (11, 33 KV switch, 3.3 KV & 415 V) within the span of 4 to 6 months at 2 x 600 MW Athena Chhattisgarh Power Limited (Vedanta Ltd.).
- Successfully completed for 350 MW commissioned activities M/s. Ind-Barath Energy (Utkal) Limited (JSW).
- Successfully completed for 700 MW commissioned activities M/s. Techno Electric and Engineering Co Ltd. at various sites.
- Successfully completed for 350 MW commissioned activities M/s. Jindal India Thermal Power, Switchyard.
- Successfully completed for 132/33 KV GIS substation commissioned activities M/s. Tata Steel, Noamundi.
- Our Engineers Mr Sarathsasi had received prestigious award ‘Successful Journey of the Project’ from M/s JSW Energy (Utkal) Limited.
Valuable Customers
Our Team
Mr. M. R. Bharanidharan
Vice President - IC Head
Mr. S. Sasikumar
AGM - ICD3 - BU I Head
Mr. Shovan GhoshShovan
AGM - ICD3 – BU II Head
Mr. G. NAGABABU
AGM - Bhubaneswar
Mr. Prasanta Kumar Paria
AGM - Guwahati
Mr. D. Thirupathi
AGM - Raipur
Connect With Us
We're here to assist you with your inquiries and project needs.Reach out to us for expert guidance, reliable solutions and seamless support tailored to your business. Let's build the future together!