• Flameproof
    Equipment
    Safety Electrified…

About Us

VMCL has always poised for relentless dedication towards New Product Development. As a part of the continual development, Flame Proof Equipment Division had Designed & Developed Flame Proof/Weather Proof protected Electrical Equipment applicable for Hazardous Area zone 1 & 2 and Explosive Gas Group IIB & IIC with Degree of Protection IP65/IP66 for use in hazardous areas such as Petrochemical, Bulk Drug, Fertilizer, Refinery units etc.



Flameproof Manufacturing

Facilities

Factory

Kovur

50+

Employees

ISO

Certified

PESO

Certified

CIMFR

Approved

BIS

Approved

5000+

Products Supplied

Factory Area

12000 Sq.ft
FLAMEPROOF/WEATHERPROOF WELL GLASS & LED FITTING
Cat. No : VMC/1233 & VMC/1233C
Material: Cast Aluminium Alloy (LM6)
Flameproof: Zone 1 & 2, GR IIB & IIC as per IS/IEC 60079 - 1:2007
Weatherproof: IP 65/66 as per IS/IEC 60529:2001, IS/IEC 60079-0/2011
Finish: Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket: Neoprene
Glass: Flat Heat Resistant Toughened Type-A
Lamp Holder: ES Holder.
Cable Entry: 2 Nos. 3/4” ET Entry.
Lamp Rating (Integral type): Upto 75W LED/COB & Upto 160W MLL
Lamp Rating (Non-Integral type): 80W HPMV,125W HPMV,70W MH
Approval : CIMFR, PESO & BIS
FLAMEPROOF/WEATHERPROOF WELL GLASS FITTING
Cat. No : VMC/1234
Material:Cast Aluminium Alloy (LM6)
Flameproof:Zone 1 & 2, GR IIB as per IS/IEC 60079-1:2007
Weatherproof:IP 65 as per IS/IEC 60529:2001
Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket:Neoprene
Glass: Well glass Heat Resistant Toughened Type-A
Lamp Holder:ES Holder.
Cable Entry:: 2 Nos. 3/4” ET Entry.
Lamp Rating (Integral type):80W HPMV,125W HPMV,70W HPSV, 70W MH 3x26W CFL,75W LED
Lamp Rating (Non-Integral type) :250W HPMV,250W HPSV, 250W MH
Approval :CIMFR, PESO & BIS
FLAMEPROOF/WEATHERPROOF TUBE LIGHT FITTING
Cat. No : VMC/1271
Material: Cast Aluminium Alloy (LM6)
Flameproof: Zone 1 & 2, GR IIB as per IS/IEC 60079-1:2007
Weatherproof: IP 65 as per IS/IEC 60529:2001
Finish: Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Approval : CIMFR, PESO & BIS
Gasket: Neoprene
Glass: Heat Resistant Toughened Type-A
Lamp Holder: Pin type Holder.
Cable Entry: 2 Nos. 3/4” ET Entry.
Lamp Rating: 1x40W,1x36W CFL,1x28W T5,1x22W LED 2x40W,2x36W CFL,2x28W T5,2x22W LED
FLAMEPROOF/WEATHERPROOF HAND LAMP FITTING
Cat. No : VMC/127
Material: Cast Aluminium Alloy (LM6)
Flameproof: Zone 1 & 2, GR IIC as per IS/IEC 60079-1:2007
Weatherproof: IP 66 as per IS/IEC 60529:2001
Finish: Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket: Neoprene
Glass: Heat Resistant Toughened Type-A
Lamp Holder: ES Holder.
Cable Entry: 2 Nos. 3/4” ET Entry
Lamp Rating: 60W GLS, 18W CFL,50W HALOGEN, upto 12W LED
Approval: CIMFR, PESO & BIS
FLAMEPROOF/WEATHERPROOF LED REACTOR VESSEL LAMP FITTING
Cat. No : VMC/128S
Material:Cast Aluminium Alloy (LM6)
Flameproof: Zone 1&2, GR IIC as per IS/IEC 60079-1:2007
Weatherproof: IP 66 as per IS/IEC 60529:2001
Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket:Neoprene
Glass:: Flat GlassHeat Resistant Toughened Type -A
Cable Entry:2 Nos. 3/4” ET Entry.
LED Rating:Upto 20W
Approval : CIMFR, PESO & BIS
FLAMEPROOF/WEATHERPROOF FLOOD LIGHT FITTING
Cat. No : VMC/151
Material: Cast Aluminium Alloy (LM6)
Flameproof: Zone 1 & 2, GR IIC as per IS/IEC 60079 -1:2007
Weatherproof: IP 66 as per IS/IEC 60529:2001
Finish: Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket: Neoprene
Glass: Heat Resistant Toughened Type-A
Lamp Holder: ES Holder.
Cable Entry: 2 Nos. 3/4” ET Entry.
Lamp Rating (Non-Integral type)): 150W MH,250W HPMV, 250W HPSV, 250W MH, 150W LED
LED Lamp Rating: Upto 150W LED / COB
Approval CIMFR, PESO & BIS
FLAMEPROOF/WEATHERPROOF LED CLEAN ROOM FITTING
Cat. No : VMC/184 CRF
Material:Cast Aluminium Alloy (LM6)
Flameproof: Zone 1&2, GR IIB as per IS/IEC 60079-1:2007
Weatherproof: IP 65 as per IS/IEC 60529:2001, IS/IEC 60079-0/2011
Finish: Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket:Neoprene
Glass:Heat Resistant Toughened Type-A
Cable Entry: 2 Nos. 3/4” ET Entry.
LED / Lamp Rating:Upto 100W LED / 2X36W CFL
Approval :CIMFR, PESO & BIS
FLAMEPROOF/WEATHERPROOF CONTROL STATION
Cat. No: VMC/1010 & VMC/175
Description: FLP/WP Push Button Station
Material:Cast Aluminium Alloy (LM6)
Flameproof: Zone 1 & 2, GR IIB & IIC as per IS/IEC 60079 -1:2007
Weatherproof:IP 65 as per IS/IEC 60529:2001
Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket:Neoprene
Cable Entry: 2 Nos. 3/4” ET Entry.
Approval : CIMFR, PESO & BIS
Cat. No: VMC/105
Description: FLP/WP Limit Switch (Roller/Lever type)
Material: Cast Aluminium Alloy (LM6)
Flameproof: Zone 1 & 2, GR IIB & IIC as per IS/IEC 60079 -1:2007
Weatherproof:IP 65 as per IS/IEC 60529:2001
Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket:Neoprene
Cable Entry: 1 No. 3/4” ET Entry.
Limit Switch : 1NO+1NC, Upto 10A 500V
Type : Roller / Lever
Approval : CIMFR, PESO & BIS
FLAMEPROOF/WEATHERPROOF ROTARY SWITCH
Ca.t No: VMC/105 & VMC/1010
Description: FLP/WP 16A DP ON/OFF Rotary Switch
Material:Cast Aluminium Alloy (LM6)
Flameproof:Zone 1 & 2, GR IIC as per IS/IEC 60079 -1:2007
Weatherproof:IP 65 as per IS/IEC 60529:2001
Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket:Neoprene
Cable Entry:2 Nos. 3/4” ET Entry.
Switch : Upto 16A DP ON/OFF Rotary Switch
Approval :CIMFR, PESO & BIS
Cat. No: VMC/175
Description: FLP/WP 40A TPN ON/OFF Rotary Switch
Material:Cast Aluminium Alloy (LM6)
Flameproof:Zone 1 & 2, GR IIC as per IS/IEC 60079 -1:2007
Weatherproof:IP 65 as per IS/IEC 60529:2001
Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket:Neoprene
Cable Entry:2 Nos. 1” ET Entry.
Switch : Upto 40A TPN ON/OFF Rotary Switch
Approval :CIMFR, PESO & BIS
FLAMEPROOF/WEATHERPROOF SWITCH
Cat. No: VMC/187
Description : FLP/WP 63A TPN ON/OFF Rotary Switch
Material:Cast Aluminium Alloy (LM6)
Flameproof:Zone 1 & 2, GR IIC as per IS/IEC 60079-1:2007
Weatherproof:IP 65 as per IS/IEC 60529:2001
Finish: Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket:Neoprene
Cable Entry: 2 Nos. 1.0” ET Entry (Max)
Switch : Upto 63A TPN ON/OFF Rotary Switch
Approval: CIMFR, PESO & BIS
FLAMEPROOF/WEATHERPROOF CONTROL GEAR BOX
Cat. No: VMC/186
Description: FLP/WP Control Gear Box
Material: Cast Aluminium Alloy (LM6)
Flameproof:Zone 1 & 2, GR IIB as per IS/IEC 60079-1:2007
Weatherproof: IP 65 as per IS/IEC 60529:2001
Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket:Neoprene
Cable Entry:As per Customer Request
Rating:Upto 400W HPMV/HPSV/MH
Approval :CIMFR, PESO & BIS
FLAMEPROOF/WEATHERPROOF FIRE ALARM STATION
Cat. No: VMC/1010
Material:Cast Aluminium Alloy (LM6)
Flameproof:Zone 1 & 2, GR IIC as per IS/IEC 60079-1:2007
Weatherproof:IP 65 as per IS/IEC 60529:2001
Finish: Post Box Red to shade 538 of IS:5 (Epoxy Powder Coated)
Gasket:Neoprene
Cable Entry: 2 Nos. 3/4” ET Entry.
Push Button:1 No. Mushroom Head Push Button Red Colour With Glass & hammer with chain
Approval :CIMFR, PESO & BIS
FLAMEPROOF/WEATHERPROOF HOOTER
Cat. No: VMC/187 & VMC/187HR
Description : FLP/WP Hooter
Material:Cast Aluminium Alloy (LM6)
Flameproof:Zone 1 & 2, GR IIC as per IS/IEC 60079 -1:2007
Weatherproof:IP 65 as per IS/IEC 60529:2001
Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket:Neoprene
Electrical Rating : 230V AC & 24.V AC/DC
Cable Entry:2 Nos. 3/4” ET Entry.
Noise Level: 120db.
Approval : CIMFR, PESO & BIS
FLAMEPROOF/WEATHERPROOF INTERLOCKED SWITCH PLUG & SOCKET
Cat. No: VMC/1010
Description : FLP/WP 25A (2P+E) Interlocked Plug & Socket
Material: Cast Aluminium Alloy (LM6)
Flameproof:Zone 1 & 2, GR IIC as per IS/IEC 60079-1:2007
Weatherproof:IP 65 as per IS/IEC 60529:2001
Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket:Neoprene
Cable Entry:2Nos. 3/4” ET Entry
Switch :Upto 25A DP ON/OFF Switch
Note:The plug cannot be removed when the switch is in ‘ON' position and can be withdrawn, only when the switch is in ‘OFF' position
Approval :CIMFR, PESO & BIS
Cat. No: VMC/187
Description: FLP/WP 32A (4P+E) Interlocked Plug & Socket
Material: Cast Aluminium Alloy (LM6)
Flameproof: Zone 1 & 2, GR IIC as per IS/IEC 60079-1:2007
Weatherproof: IP 65 as per IS/IEC 60529:2001
Finish: Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket: Neoprene
Cable Entry: 2Nos. 1” ET Entry.
Switch : 32A TPN ON/OFF Switch
Note : The plug cannot be removed when the switch is in ‘ON' position and can be withdrawn, only when the switch is in ‘OFF' position
Approval : CIMFR, PESO & BIS
Cat. No: VMC/186
Description: FLP/WP 63A/100A (4P+E) Interlocked Plug & Socket
Material: Cast Aluminium Alloy (LM6)
FlameproofZone 1 & 2, GR IIC as per IS/IEC 60079-1:2007
Weatherproof:IP 65 as per IS/IEC 60529:2001
Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket:Neoprene
Cable Entry:2Nos. 1 1/2” ET Entry.
Switch :63A/100A TPN ON/OFF Switch/MCB/ELCB
Note :The plug cannot be removed when the switch is in O` N' position and can be withdrawn, only when the switch is in O` FF' position
Approval : CIMFR, PESO & BIS
FLAMEPROOF/WEATHERPROOF STARTER
Cat. No: VMC/175
Description : FLP/WP DOL Starter from 0.5HP to 15HP (Without Isolator)
Material:Cast Aluminium Alloy (LM6)
Flameproof:Zone 1 & 2, GR IIB as per IS/IEC 60079-1:2007
Weatherproof:IP 65 as per IS/IEC 60529:2001
Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket:Neoprene
Cable Entry:2Nos. 1” ET Entry & 1No.3/4” ET Entry.
Start PB:Green Colour, Momentry Type
Stop PB : Red Colour, Padlockable Type
Approval :CIMFR, PESO & BIS
Cat. No: VMC/187
Description: FLP/WP DOL Starter from 0.5HP to 15HP ( With Isolator)
Material: Cast Aluminium Alloy (LM6)
Flameproof:Zone 1 & 2, GR IIC as per IS/IEC 60079-1:2007
Weatherproof: IP 65 as per IS/IEC 60529:2001
Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket:Neoprene
Cable Entry: 2Nos. 1” ET Entry & 1No.3/4” ET Entry.
Start PB : Green Colour, Momentry Type
Stop PB : Red Colour, Padlockable Type
Switch : 16A / 32A (Max) DP ON/OFF Rotary Switch
Approval : CIMFR, PESO & BIS
Cat. No: VMC/1001 & VMC/186
Description: FLP/WP Star/Delta Starter upto 150HP
Material:: Cast Aluminium Alloy (LM6)
Flameproof:Zone 1 & 2, GR IIB as per IS/IEC 60079-1:2007
Weatherproof:IP 65 as per IS/IEC 60529:2001
Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket:Neoprene
Terminal Block:As per Customer Request
Cable Entry:As per Customer Request
Approval :CIMFR, PESO & BIS
FLAMEPROOF/WEATHERPROOF JUNCTION BOX
Cat. No: VMC/105
Description : FLP/WP 4 Way Junction Box
Material:Cast Aluminium Alloy (LM6)
Flameproof:Zone 1 & 2, GR IIC as per IS/IEC 60079-1:2007
Weatherproof:IP 65 as per IS/IEC 60529:2001
Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket:Neoprene
Terminal Block :4Nos. 2.5sqmm terminal
Cable Entry: As per Customer Request
Approval :CIMFR, PESO & BIS
Cat. No: VMC/186
Description: FLP/WP Multiway Junction Box
Material:Cast Aluminium Alloy (LM6)
Flameproof:Zone 1 & 2, GR IIB as per IS/IEC 60079-1:2007
Weatherproof:IP 65 as per IS/IEC 60529:2001
Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket:Neoprene
Terminal Block:As per Customer Request
Cable Entry:As per Customer Request
Dimension :Refer Table 1
Approval :CIMFR, PESO & BIS
FLAMEPROOF/WEATHERPROOF DISTRIBUTION BOARD
Cat . No: VMC/1001 & VMC/186
Description: FLP/WP 12/18/24/36 Way Lighting / Power Distribution Board
Material:Cast Aluminium Alloy (LM6)
Flameproof:Zone 1 & 2, GR IIB as per IS/IEC 60079-1:2007
Weatherproof:IP 65 as per IS/IEC 60529:2001
Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket:Neoprene
Terminal Block & Cable Entry :As per Customer Request
Dimensions :Refer Table 1
Approval :CIMFR, PESO & BIS
FLAMEPROOF/WEATHERPROOF WEIGHING INSTRUMENT ENCLOSURE
Cat. No : VMC/186
Description: FLP/WP 12/18/24/36 Way Lighting / Power Distribution Board
Material:Cast Aluminium Alloy (LM6)
Flameproof:Zone 1 & 2, GR IIB as per IS/IEC 60079-1:2007
Weatherproof:IP 65 as per IS/IEC 60529:2001
Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket:Neoprene
Terminal Block & Cable Entry: As per Customer Request
Dimensions : Refer Table 1
Approval :CIMFR, PESO & BIS
Cat. No : VMC/186
Description FLP/WP Instrument Enclosure
Material:Cast Aluminium Alloy (LM6)
Flameproof: Zone 1&2, GR IIB as per IS/IEC 60079-1:2007
Weatherproof:IP 65 as per IS/IEC 60529:2001, IS/IEC 60079-0/2011
Type :4 & 6 Push Button Enclosure
Approval :CIMFR, PESO & BIS
Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket:Neoprene
Terminal Blocks & Cable Entry :As per Request
FLAMEPROOF/WEATHERPROOF WEIGHING INSTRUMENT ENCLOSURE
Cat. No : VMC/1001
Material: Cast Aluminium Alloy (LM6)
Flameproof : Zone 1&2, GR IIB as per IS/IEC 60079-1:2007
Weatherproof : IP 65 as per IS/IEC 60529:2001, IS/IEC 60079-0/2011
Type : 24 Push Button with 5 Switch Enclosure
Finish: Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket: Neoprene
Terminal Blocks & Cable Entry : As per Request
Approval : CIMFR, PESO & BIS
FLAMEPROOF/WEATHERPROOF CONTROL PANEL
Cat. No: VMC/1001 & VMC/186
Description : FLP/WP PLC Panel / MCC Panel
Material: Cast Aluminium Alloy (LM6)
Flameproof:Zone 1 & 2, GR IIB as per IS/IEC 60079-1:2007
Weatherproof:IP 65 as per IS/IEC 60529:2001
Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket:Neoprene
No. of Feeders :As per Customer Request
Cable Entry :As per Customer Request
Approval:CIMFR, PESO & BIS
FLAMEPROOF/WEATHERPROOF CAMERA ENCLOSURE
Cat. No : VMC/1271 CA
Description : FLP/WP Camera Housing Enclosure
Material: Cast Aluminium Alloy (LM6)
Flameproof: Zone 1&2, GR IIC as per IS/IEC 60079-1:2007
Weatherproof:IP 65 as per IS/IEC 60529:2001, IS/IEC 60079-0/2011
Finish:Light Grey to Shade 631 of IS:5 (Epoxy Powder Coated)
Gasket:Neoprene
Terminal Blocks & Cable Entry : As per Request
Approval:CIMFR, PESO & BIS
FLAMEPROOF/WEATHERPROOF GLAND AND ACCESSORIES
Cat. No : VMC/209G & VMC/209P
Description: FLP/WP Double compression cable Gland FLP/WP Dummy Plug
Material:Brass, Stainless Steel, Aluminium & MS
Flameproof: Zone 1 & 2, GR IIB as per IS/IEC 60079-1:2007
Weatherproof: IP 66 as per IS/IEC 60529:2001
Size: 3/4" to 3” BSC Thread 1/2" to 2 1/2 “ NPT
Approval :CIMFR, PESO & BIS
WEATHERPROOF CONTROL STATION
Cat. No: VMC/WP14
Description : Weatherproof Start/Stop Push Button Station
Material: Cast Aluminium Alloy
IP ProtectionIP 65 as per IS/IEC 60529:2001
FinishLight Grey to Shade 631 of IS:5 or RAL 7032 (Epoxy Powder Coated)
GasketNeoprene
Cable Entry:2 Nos. 3/4” ET Entry.
Start PB: Green Colour, Momentary Type
Stop PB: Red Colour, Mushroom Head, Pad Lockable or Key Lockable type
Cat. No: VMC/WP02
Description : Weatherproof Forward/Reverse/Stop Push Button Station
MaterialCast Aluminium Alloy.
IP ProtectionIP 65 as per IS/IEC 60529:2001
Finish: Light Grey to Shade 631 of IS:5 or RAL 7032 (Epoxy Powder Coated)
Gasket: Neoprene
Cable Entry: 2 Nos. 3/4” ET Entry.
Forward PB:Green Colour, Momentary Type
Reverse PB:Yellow Colour, Momentary Type
Stop PB: Red Colour, Mushroom Head, Pad Lockable or Key Lockable type
Cat. No: VMC/WP03
Description : Weatherproof Start/Stoppush Button Station With Ammeter
Material: Cast Aluminium Alloy
IP Protection: IP 65 as per IS/IEC 60529:2001
Finish: Light Grey to Shade 631 of IS:5 or RAL 7032 (Epoxy Powder Coated)
Gasket:Neoprene
Cable Entry: 3 Nos. 3/4” ET Entry
Start PB: Green Colour, Momentary Type
Stop PB: Red Colour, Mushroom Head, Pad Lockable or Key Lockable type
Ammeter: 1No.72sqmm Analog Ammeter
WEATHERPROOF CONTROL STATION
Cat. No: VMC/WP05
Description : Weatherproof Local Control Station with Combination Of Push Button/ Indicating Lamp/ Ammeter/ Rpm Meter
Material: Cast Aluminium Alloy.
IP Protection:IP 65 as per IS/IEC 60529:2001
Finish:Light Grey to Shade 631 of IS:5 or RAL 7032 (Epoxy Powder Coated)
Gasket:Neoprene
Push Button & Indicating Lamp:As Per Customer Request
Terminal Block:As Per Customer Request
Cable Entry:As Per Customer Request
WEATHERPROOF JUNCTION BOX
Cat. No: VMC/WP17
Description : Weatherproof 4 Way Junction Box
Material:Cast Aluminium Alloy
IP Protection:IP 65 as per IS/IEC 60529:2001
Finish:Light Grey to Shade 631 of IS:5 or RAL 7032 (Epoxy Powder Coated)
Gasket:Neoprene
Terminal Block:Upto 6 Nos.2.5 Sqmm Terminal
Cable Entry:4 Nos 3/4” ET Entry.
Cat. No: VMC/WP04
Description : Weatherproof Street Light Junction Box
Material:Cast Aluminium Alloy.
IP Protection:IP 65 as per IS/IEC 60529:2001
Finish:Light Grey to Shade 631 of IS:5 or RAL. 7032 (Epoxy Powder Coated)
Gasket:Neoprene
Electrical Accessories:1 Set of SP MCB & Neutral Link
Terminal Block:6 Nos. 2.5 Sq.mm Terminal
Cable Entry: 3 Nos. 3/4“ ET Entry.
WEATHER PROOF MULTIWAY JUNCTION BOX
Material:Cast Aluminium Alloy
IP Protection:IP 65 as per IS/IEC 60529:2001
Finish:Light Grey to Shade 631 of IS:5 or RAL 7032 (Epoxy Powder Coated)
Gasket:Neoprene
Terminal Block: As Per Customer Request
Cable Entry:As Per Customer Request
Dimension : As Per below Chart
S.NO Organization Name Description Validity
1. TANTRANSCO Flameproof Equipments 19.08.2024
2. Bharat Petroleum Corporation Limited Flameproof Equipments Permanent
3. Bharat Heavy Electricals Ltd, Trichy Flameproof Junction Box & Cable Glands Permanent
4. Indian Oil Corporation Limited Flameproof Products Permanent
S.NO Organization Name Description
1. Precia Molen India Pvt Ltd, Thirumazhisai Flameproof Junction Box, I400 Indicator, I40 Indicator, Enclosure with Push Buttons, Cable Glands & Blanking Plugs
2. V.S.Pressure Vessels & Gas Projects Pvt Ltd Flameproof LED Well Glass Fitting, Local Control Station, Cable Glands, Plug & Sockets, Junction Box
3. Thirumani Industry Flameproof Junction Box



Our Certifications







Our Team


Contact Us

We are offering best Services

Feel free to Contact us if you have any queries / requirements





Company

Voltech Manufacturing Company Ltd

Address

132, 133 & 134, Sri Kumaran Nagar, Kundrathur Main Road, Kovur, Chennai – 600 128

Send Mail

[email protected]

VOLTECH Group is a reputed, experienced and professional Electrical Engineering Company with a proven background in the areas of Testing & Commissioning of medium and heavy-duty Electricals in the Power and Transmission Sector

Contact Us


Address:
No. 2/429, Voltech Eco Tower, Mount Poonamallee Road,
Ayyappanthangal, Chennai
Phone: +91-44-43978000
Email: [email protected]